2-Bow Bimini Top Boat Cover - 600D Oxford & 6063 Aluminum Frame (Grey)
Boat_Canopy_Accessories • Top Pick
Check PriceSun’s beating down. Deck’s hot enough to fry an egg. Your upholstery is cracking. You’re squinting like a bat in a lighthouse. Without a decent top, you’re just bait in a frying pan. It’s miserable out there without shade.
I see lubbers buying cheap nylon rags every season. Those thin covers rip in a ten-knot breeze. They use plastic fittings. Plastic belongs in a toy box, not on a vessel. Plastic snaps. It gets brittle under UV. Then you’ve got rust streaks on your gelcoat from low-grade steel. Absolute garbage. Don't be that sailor.
Get the 2-Bow Bimini Top Boat Cover - 600D Oxford & 6063 Aluminum Frame (Grey). It’s built for the salt. The 600D Oxford fabric is thick. It blocks the sun and keeps the rain off your neck. The 6063 Aluminum frame is rigid. It doesn’t buckle when you open the throttle. This is proper kit.
| Feature | 2-Bow Bimini Top (600D/6063) | Generic Alternatives |
|---|---|---|
| Material | 600D Oxford / 6063 Aluminum | Thin Polyester / Plastic Tubes |
| UV Resistance | Grade 5+ Industrial Shield | Poor (Fades in 1 month) |
| Hardware | 316 Stainless Steel Hooks | Nylon or Low-Grade Zinc |
Technical Glossary
- 6063 Aluminum Alloy
- An architectural-grade alloy. Exceptional corrosion resistance. High tensile strength for marine frames.
- 600D Oxford Fabric
- Heavy-duty marine polyester. The 'D' stands for Denier, measuring thickness. 600D provides superior tear strength and UV block.
If you need more coverage for a bigger rig, look at the Marine Bimini Top - 6063 Aluminum Square Tube & 600D Fabric (96"). For those who want the ultimate corrosion protection, the 3-Bow Bimini Top - 304 Stainless Steel & 600D Oxford Cloth (183cm L) is the way to go. Center console pilots should check the Marine T-Top Bimini for Center Console - 25mm Aluminum Frame (Blue).
Don't just take my word for it. Head over to the TinBoats Aluminum Forum and see what the veterans say about proper framing. Keep the plastic off your deck. Keep the sun off your head. Do it right the first time.
FAQ
- Can this Bimini top withstand high speeds while boating?
- Yes. The frame is built with industrial-grade 25mm 6063 Aluminum Alloy with 1.5mm wall thickness, and the 600D Oxford fabric has a certified tear strength of 200kgs. Combined with 316 stainless steel hooks, it remains stable even in wind-resistant conditions.
- Is the hardware prone to rust in saltwater environments?
- No. Unlike standard hardware, this unit utilizes 316 Stainless Steel hooks, eyelets, and mounting clips, which are specifically engineered for marine salt-spray resistance and long-term corrosion prevention.
- What if my boat doesn't have a flat surface for the rear support bars?
- This Bimini top features a Dual-Mode Installation system. You can easily switch between the front/rear strap model for versatile mounting on various hull shapes or the support bar model for rigid stability where space permits.
Leave a comment
This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.