Center Console T-Top Boat Cover with Side Zippers - 16-32 ft
Protect your center console boat with an AirowMarine center console T-top boat cover designed for compatible T-top and selected hard-top boat layouts. This gray boat cover features PU-coated Oxford fabric, seam-sealing tape at stitched areas, and side zippers to help with access and fitting around the center-console configuration.
Available in 8 size options for nominal boat lengths from 16 to 32 feet, this cover offers different maximum beam limits depending on the selected size. Before ordering, measure your boat's overall length and maximum beam, and check the T-top structure, console layout, and installed accessories to help determine the appropriate fit.
Key Features of This Center Console Boat Cover
PU-Coated Oxford Fabric
Made with Oxford fabric featuring a polyurethane (PU) coating. The fabric construction is intended for boat-cover use. Actual weather resistance and service life depend on the material specifications, fit, exposure, and maintenance.
Side Zippers for Access and Fitting
Side zippers help with access and fitting around the center-console layout. Check the product gallery to understand the zipper positions and cover configuration. Zippers should not be assumed to form watertight closures.
Seam-Sealing Tape
Seam-sealing tape is applied at stitched areas to help limit water entry through the seams. Overall water resistance depends on the complete cover construction, fit, exposure, and condition.
Eight Size Options for 16-32 ft Boats
Choose from eight nominal boat-length ranges, from 16-18 ft through 30-32 ft. Maximum beam limits are 96, 104, or 114 inches, depending on the selected variant.
Designed Around Center-Console Layouts
The cover is designed around center-console boats with compatible T-top or selected hard-top configurations. Boat length alone does not establish compatibility. Check the top geometry, windshield, rails, console equipment, and other permanent accessories before ordering.
Center Console T-Top Boat Cover Size Chart
Use this chart to compare your boat's nominal length and maximum beam with the available size options.
| Nominal Boat Length | Maximum Beam |
|---|---|
| 16-18 ft | 96 in |
| 18-20 ft | 96 in |
| 20-22 ft | 104 in |
| 22-24 ft | 104 in |
| 24-26 ft | 114 in |
| 26-28 ft | 114 in |
| 28-30 ft | 114 in |
| 30-32 ft | 114 in |
Important: These are the stated maximum beam limits for the listed size ranges, not a guarantee of fit for every boat within those lengths. Confirm the measurements and configuration of your vessel before selecting a size.
How to Choose the Right T-Top Boat Cover
Choosing the correct center console boat cover requires more than matching the boat's advertised length.
- Measure overall boat length. Use a consistent measurement method and compare the result with the listed nominal length range.
- Measure maximum beam. Check the widest part of the boat against the maximum beam listed for the selected size.
- Check the T-top or hard-top layout. Compare the top's shape, height, and position with the product images and cover configuration.
- Account for installed accessories. Consider the windshield, antennas, rod holders, rails, seating, console equipment, and other permanent fittings that may affect cover fit.
- Review the product gallery. Examine the zipper placement, straps, cover shape, and any available fitment illustrations.
- Confirm compatibility before ordering. If the dimensions or layout are uncertain, contact AirowMarine with your boat's make, model, year, overall length, maximum beam, and clear photos.
A boat that falls within the listed length range may still be unsuitable if its beam or top configuration exceeds the intended fit.
Material and Construction Details
| Specification | Details |
|---|---|
| Brand | AirowMarine |
| Product Type | Center Console Boat Cover |
| Cover Style | T-Top Boat Cover with Side Zippers |
| Compatible Layouts | Compatible T-Top and Selected Hard-Top Configurations |
| Color | Gray |
| Fabric | Oxford Fabric |
| Coating | PU (Polyurethane) Coating |
| Seam Detail | Seam-Sealing Tape at Stitched Areas |
| Access Feature | Side Zippers |
| Size Options | 8 |
| Nominal Boat Length Range | 16-32 ft |
| Maximum Beam Options | 96, 104, or 114 in, depending on size |
Refer to the product gallery and selected variant information for any additional construction details, measurements, or included accessories.
Use, Care and Storage
To help maintain your boat cover:
- Follow the manufacturer's instructions for installation, cleaning, and storage.
- Position and secure the cover as instructed to help reduce loose fabric and water pooling.
- Inspect zippers, straps, seams, and contact points regularly for wear or damage.
- Allow the cover to dry before long-term storage, where practical.
- Remove standing water and check the cover after heavy rain or severe weather.
- Before trailering, confirm that the cover and every attachment are secured according to the cover and vessel manufacturers' instructions.
Water resistance depends on cover fit, fabric and seam construction, zipper position, support, exposure, and maintenance. Do not assume the cover is fully waterproof or suitable for high-speed trailering unless those uses are expressly confirmed by the manufacturer.
Ordering and Shipping
Select the size range that matches your boat's measurements and configuration before adding the cover to your cart.
Shipping methods, charges, and estimated delivery times are displayed during checkout for your selected destination. Import duties or local taxes may apply depending on the destination and applicable regulations.
For questions about product specifications, size selection, boat compatibility, or shipping, please contact AirowMarine at sales@airowmarine.com before ordering.
Frequently Asked Questions
What size T-top boat cover do I need?
Compare your boat's nominal length and maximum beam with the size chart. Then check the T-top or hard-top layout, console position, and permanent accessories. Matching boat length alone does not guarantee a suitable fit.
Will this cover fit a 20 ft center console boat?
The chart lists a 20-22 ft option with a maximum beam of 104 inches. Confirm your boat's actual length, maximum beam, top configuration, and accessories before ordering.
What is the maximum boat beam for this cover?
The listed maximum beam limits are 96 inches for the 16-20 ft ranges, 104 inches for the 20-24 ft ranges, and 114 inches for the 24-32 ft ranges. Refer to the size chart and verify the measurements of your selected variant.
Is this a T-top boat cover or a hard-top boat cover?
It is primarily described as a center console T-top boat cover and is intended for compatible T-top and selected hard-top layouts. Do not assume that every hard-top design will fit. Check the cover geometry and product images before purchase.
What material is the boat cover made from?
The cover uses Oxford fabric with a PU coating. Seam-sealing tape is applied at stitched areas, and side zippers assist with access and fitting. Refer to the manufacturer's documentation for additional fabric specifications.
Is the cover waterproof?
The product features PU-coated Oxford fabric and seam-sealing tape. However, overall water resistance depends on construction, fit, exposure, maintenance, and zipper placement. No specific waterproof rating is claimed unless supported by manufacturer documentation.
Are the side zippers waterproof?
The side zippers are intended to assist with access and fitting. They should not be treated as watertight closures unless the manufacturer explicitly confirms that performance.
Can I use this boat cover while trailering?
Before trailering, verify that the cover is specifically approved for the intended speed and road conditions. Secure every attachment and follow the manufacturer's instructions. Do not assume suitability for highway or high-speed trailering based solely on the product description.
How do I confirm compatibility with my boat?
Provide the boat's make, model, year, overall length, maximum beam, and clear photos showing the T-top, console, windshield, and accessories. These details help assess whether the cover's shape and dimensions are appropriate.
Need Help Selecting Your Boat Cover?
Before ordering, confirm your boat's length, maximum beam, and T-top configuration against the size chart.
If you need help checking compatibility, email sales@airowmarine.com with your boat's make, model, year, overall length, maximum beam, and clear photos of the T-top, console, and installed accessories. Our team can review the information to help you determine whether the cover may be suitable for your boat.














