Marine Turning Lock - 316 Stainless Steel Flush Slam Latch (2"")
Marine_Hatch_Hardware • Top Pick
Check PriceNothing disrupts the fluid beauty of a well-appointed deck quite like a stubborn, rattling hatch latch. You’ve curated every cushion and selected the perfect teak finish, yet that one snagging mechanism makes your storage feel clunky and unrefined. When your hardware fails to meet the standards of your design, the entire experience of being on the water loses its luster.
It starts with a slight resistance, a faint squeak, and before long, generic chrome-plated or plastic latches begin to succumb to the unforgiving salt air. These inferior alternatives don't just lose their shine; they become structural liabilities. A corroded latch can leak moisture into your dry storage, damaging expensive gear and creating unsightly rust stains that bleed into your gelcoat. To understand the science behind this degradation, one must look at the nuances of marine grade stainless steel and why it is the only choice for the discerning mariner.
The solution is as much a matter of aesthetics as it is engineering: the Marine Turning Lock - 316 Stainless Steel Flush Slam Latch (2"). This piece of hardware is the 'jewelry' of your boat—a mirror-polished masterpiece designed to sit perfectly flush with your deck, maintaining a seamless silhouette while providing the tactile satisfaction of a secure, heavy-duty closure. Unlike standard pulls, this latch is crafted for those who refuse to compromise on form or function.
The Standard of Excellence: Comparison
When selecting hardware, the distinction between 'marine-look' and true marine-grade is vast. Below is how our 316 Stainless Steel Flush Slam Latch stands against common market alternatives:
| Feature | Marine Turning Lock (316 SS) | Generic Alternatives |
|---|---|---|
| Material | 316 Marine Grade Stainless Steel | 304 Stainless or Chrome-Plated Plastic |
| UV Resistance | Total (High-Polished Finish) | Low (Prone to cracking/yellowing) |
| Price | Premium Investment | Low Initial / High Replacement Cost |
Completing the Visual Narrative
Hardware should never be an afterthought. To achieve a truly cohesive look, pair your new latch with our Flush Pull Slam Latch - 316 Stainless Steel Mirror Polished (2" Cutout) for consistency across all cabinetry. For heavier deck lids, ensure your support matches your style with the Marine Offset Hinge - 316 Stainless Steel Heavy-Duty (85x40mm), and finish the look with the sleek lines of our 316 Stainless Steel Boat Hand Rail Fitting - 45° Round Base (7/8").
- Molybdenum
- An alloying element added to 316 stainless steel that significantly increases corrosion resistance, particularly against salt-induced pitting.
- Flush Mount
- A design style where the hardware sits level with the surface, eliminating trip hazards and creating a clean, modern aesthetic.
FAQ
- Will this latch rust in saltwater conditions?
- No. This latch is crafted from genuine 316 Marine Grade Stainless Steel, which contains molybdenum for superior resistance to chloride-induced pitting and crevice corrosion compared to 304 or lower grades.
- Is the mounting depth adjustable for different hatch thicknesses?
- Yes. As shown in the technical diagram, the cam arm is mounted on a threaded bolt with a lock nut, allowing for precise adjustment to match the specific thickness of your deck or hatch lid.
- Does this latch require a specific cutout size for installation?
- This is a standard 2-inch (50mm) marine cutout latch. If you are replacing an existing Perko or Southco latch, this universal design typically serves as a direct drop-in replacement.
Leave a comment
This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.