Automatic$99+
$7 off
EVA Flooring
EVA Foam Boat Flooring: How to Measure, Dry-Fit and Install a Model-Specific Kit
A practical guide to confirming boat-model fitment, dry-fitting a CNC-cut EVA foam kit, preparing the deck, installing each pad and avoiding common failures.
304 vs 316 Stainless Steel vs Galvanized Steel for Marine Hardware
A practical guide to choosing 304 stainless, 316 stainless or galvanized steel for marine hardware based on exposure, component design, maintenance and application.
Spring Boat Hardware Inspection: A Dockside Checklist
A bow-to-stern spring inspection for cleats, rails, hatches, drains and ground tackle, with clear stop points for structural or below-waterline concerns.
Boat Railing Fittings: Measure, Inspect and Replace Bases, Elbows and Tees
Measure tube diameter, socket depth, angles, footprints, hole patterns and backing before replacing marine rail bases, elbows or tees.
Boat Hatch Latches: Fitment, Compression and Rattle Diagnosis
Diagnose hatch rattle before replacement and measure cutout, panel thickness, grip, cam and striker geometry.
Boat Hinges: Match Geometry, Pin Direction and Fastener Pattern
A practical guide to matching marine hinge motion, offset, pin position, leaf geometry and fastener pattern before drilling.
What to Measure Before Ordering Boat Deck Hardware
The six-photo and measurement record that makes a marine-hardware fitment question answerable.
Clam Cleats on Small Boats: Line Diameter, Lead Angle and Inspection
How rope diameter, construction, lead angle, mounting and release path affect a clam-cleat installation.
Boat Cleats and Bollards: Mounting, Backing and Inspection
Treat mooring hardware as a load path: line lead, cleat or bollard, fasteners, backing and deck structure all matter.
Marine Intake Strainers and Thru-Hulls: Selection and Inspection
A safety-first system guide to raw-water intake strainers, thru-hulls, seacocks, hose connections and haul-out inspection.