Marine Flush Pull Slam Latch - 316 Stainless Steel Hatch Handle
Marine_Hardware • Top Pick
Check PriceYour deck is a minefield. That cheap plastic handle you bought? It’s a liability. One bad step and it snaps. Now you’ve got a hole in your deck and a tripped guest. It’s gear failure, plain and simple. Most boaters settle for factory-grade swill. It’s weak. It’s dangerous.
Saltwater eats inferior metals for breakfast. Use 304 steel or plastic, and you’re begging for rust streaks and UV rot. A flimsy latch won't hold when the sea gets angry. You need hardware that bites back. If it isn't flush, it's a trip hazard for anyone on Kayak Bass Fishing trips or deep-sea hauls. Stop buying scrap metal.
The Marine Flush Pull Slam Latch - 316 Stainless Steel Hatch Handle is the only way to refit right. It’s over-engineered. It’s solid. It sits perfectly level with the deck. You slam it, it stays shut. No fiddling. No corrosion. Pair it with a Marine Grade 316 Stainless Steel Hinge - Heavy Duty Oval (40x75mm) for a hatch that actually works. Don't forget a 316 Stainless Steel Boat Deck Drain - High-Flow Marine Scupper (50mm) to keep the bilge dry while you're at it.
| Material | UV Resistance | Price |
|---|---|---|
| 316 Stainless Steel | Maximum | Investment Grade |
| Generic Plastic/Nylon | Poor (Brittle) | Cheap Junk |
| 304 Stainless Steel | Moderate (Pits) | Budget |
Upgrade to the Flush Pull Slam Latch - 316 Stainless Steel Mirror Polished (2" Cutout) and stop worrying about your hardware failing when the swell picks up.
- Molybdenum
- The chemical element added to 316 stainless steel to prevent pitting and crevice corrosion in chloride environments.
- Slam Latch
- A mechanism that automatically engages the bolt or catch when the hatch is pushed shut, requiring no manual turning.
FAQ
- Will this latch rust if used in saltwater?
- No. Unlike common hardware, this latch is forged from solid 316 Stainless Steel, which contains molybdenum to resist the pitting and crevice corrosion typical of saltwater environments.
- Does this latch sit completely flat against the deck?
- Yes. The seamless flush design ensures the handle sits perfectly level with the flange when closed, preventing it from becoming a trip hazard or catching on fishing lines.
- What is the benefit of the 'Slam' mechanism?
- The slam-to-close design allows you to secure hatches quickly without needing to manually turn a handle, which is critical for safety and convenience when navigating rough waters.
Leave a comment
This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.