2kW Pure Sine Wave Marine Inverter with Built-In Battery Charger
The AirowMarine 2kW Pure Sine Wave Marine Inverter with Battery Charger is designed for boat and yacht electrical systems that require DC-to-AC power conversion and battery charging in one unit. Its pure sine wave output is intended for compatible onboard electrical equipment, while the integrated multi-stage battery charger supports battery charging when a suitable AC charging source is available.
Featuring a blue anodized aluminum housing, this 2000W marine power inverter is designed for use in suitable marine power installations. Before ordering, confirm the inverter's input voltage, AC output voltage, frequency, continuous power rating, surge capacity, battery compatibility and charging specifications against the technical information for the exact model.
Key Features of the AirowMarine Marine Inverter Charger
- 2kW power conversion: A 2000W-class marine inverter for converting DC battery power to AC power, subject to the unit's rated operating conditions.
- Pure sine wave output: Designed to provide a smooth AC waveform for compatible electrical and electronic equipment.
- Built-in multi-stage battery charger: Combines inverter and battery-charging functions in one device. Charging performance depends on the specified charging profile, battery type and available AC input.
- Blue anodized aluminum housing: Provides a finished metal enclosure intended for use in suitable marine electrical installations. Actual corrosion performance depends on the materials, environment and maintenance.
- Marine and mobile power applications: May suit compatible boat, yacht or RV electrical systems when the system voltage, power requirements, ventilation and installation conditions match the product specifications.
Typical Applications
The AirowMarine 2kW pure sine wave inverter charger may be considered for compatible electrical systems powering equipment such as:
- Marine navigation electronics, including chartplotters and GPS units
- Compatible onboard computers, communication equipment and consumer electronics
- Selected AC appliances within the inverter's rated continuous and surge limits
- Suitable yacht, boat or RV electrical systems with matching battery and charging configurations
Check each device's starting current and power consumption before connecting it. Motors, pumps, compressors and other inductive loads may require additional surge capacity. The total connected load must remain within the inverter's specified limits.
Product Specifications
Confirm the values below against the manufacturer's technical datasheet for this exact model before publishing.
| Brand | AirowMarine |
|---|---|
| Product type | Pure sine wave marine inverter charger |
| Rated power class | 2kW / 2000W - verify continuous rating |
| Output waveform | Pure sine wave, as specified for this model |
| DC input voltage | Confirm from the product datasheet |
| AC output voltage | Confirm from the product datasheet |
| Output frequency | Confirm from the product datasheet |
| Peak / surge power | Confirm from the product datasheet |
| Built-in battery charger | Yes, according to the product description |
| Supported battery types | Confirm compatible battery chemistries |
| Maximum charging current | Confirm from the product datasheet |
| Housing | Blue anodized aluminum, as shown |
| Dimensions and weight | Refer to the technical drawing or specification sheet |
| Included accessories | Confirm the exact contents of the package |
Compatibility and Installation
Before purchasing this marine DC-to-AC inverter, check the following:
- Battery voltage: Match the inverter's DC input voltage to the battery bank. Do not assume that a 12V or 24V system is supported without checking the model specifications.
- AC output requirements: Confirm the required output voltage and frequency for your equipment.
- Power demand: Check both the total running wattage and the startup surge of connected appliances.
- Battery charging: Verify the supported battery chemistry, charging voltage and maximum charging current.
- Installation space: Allow for the clearances, ventilation and cable routing required by the manufacturer's instructions.
- Marine environment: Install the unit in a location that meets its documented environmental and protection requirements. Do not assume that an anodized aluminum housing makes the entire inverter waterproof or suitable for direct saltwater exposure.
Professional installation by a qualified marine electrician is recommended. Use correctly sized cables, suitable overcurrent protection, appropriate grounding and the manufacturer's wiring instructions. Disconnect power sources before installation or servicing.
Important Safety Information
An inverter's rated power does not guarantee compatibility with every appliance. Avoid exceeding the continuous or surge ratings, and never operate the unit outside its specified input voltage, temperature or environmental limits.
The inverter should not be described as waterproof, IP-rated, salt-spray tested or suitable for a specific battery chemistry unless the corresponding rating or compatibility is documented by the manufacturer.
Ordering and Shipping
Review the product specifications and installation requirements before ordering. Shipping options, delivery estimates and applicable charges are calculated at checkout based on the destination and selected service. Import duties or local taxes may apply.
For help confirming the correct model, battery compatibility or installation requirements, contact sales@airowmarine.com. Include your battery voltage, intended AC equipment and installation details so the team can help you check suitability.
Frequently Asked Questions
What does a 2kW pure sine wave marine inverter do?
A 2kW pure sine wave marine inverter converts DC power from a compatible battery system into AC power. The actual equipment it can operate depends on its rated continuous output, surge capacity, output voltage and frequency.
What is the benefit of a pure sine wave inverter for boats?
Pure sine wave output is designed to provide AC power with a smooth waveform. It can be appropriate for compatible navigation electronics, computers and other sensitive equipment, provided their electrical requirements match the inverter's output specifications.
Does this marine inverter include a battery charger?
The product is described as having a built-in multi-stage battery charger. Confirm the supported AC charging input, battery chemistry, charging voltage and maximum charging current before connecting it to a battery system.
Can I use this 2000W inverter on a 12V or 24V boat battery system?
Do not assume compatibility from the 2kW power rating alone. Check the exact model's DC input voltage and the battery bank configuration before purchase.
Can it power appliances with motors or high startup current?
Possibly, if the appliance's startup demand is within the inverter's documented surge capacity. Check the appliance's starting current and the inverter's continuous and peak power ratings before use.
Is the inverter waterproof or salt-spray proof?
No waterproof or salt-spray rating should be assumed from the housing material or product appearance. Refer to the manufacturer's documented environmental ratings and install the inverter only in a suitable location.
How do I confirm that this inverter is suitable for my boat?
Compare your battery voltage, required AC output, connected load, charging needs and installation space with the model's datasheet. For assistance, email sales@airowmarine.com before ordering.