A low-profile tubeless deck drain for boat and yacht drainage applications. The body is made from mirror-polished 316 stainless steel and uses an open strainer pattern to help keep larger debris out of the drain opening.
In stock: Verify the flange, opening and installation depth against the existing deck before adding to cart.
Dimensions and fit
| Flange diameter | Approximately 75.6 mm |
|---|---|
| Open drain diameter | Approximately 51.6 mm |
| Base width | Approximately 58.6 mm |
| Overall depth | Approximately 29 mm |
| Material | AISI 316 stainless steel |
| Design | Tubeless, flush-mount deck drain |
Installation notes
- Compare the dimension diagram with the existing cutout and drainage path.
- Confirm that the deck thickness and access below the mounting area are suitable.
- Use marine-compatible sealant and fasteners selected for the deck material.
- Keep the opening clear and inspect the seal as part of routine maintenance.
Installation conditions vary by vessel. A qualified installer should confirm drainage routing and sealing where water ingress could affect safety or the structure.
Delivered-cost tip: For small hardware, combining the drain with the other fittings needed for the same job may improve delivered-cost efficiency. Shipping is calculated at checkout for the cart and destination.
Questions
Does “tubeless” mean it fits every deck?
No. It describes the drain style; the opening, deck thickness, discharge path and mounting space still need to match.
Can it be used in saltwater service?
316 stainless steel is commonly selected for marine environments, but rinsing and periodic inspection are still recommended.