12-Inch 316 Stainless Steel Boat Grab Handle Set - 2-Pack
Upgrade your boat's boarding and movement areas with this 12-inch 316 stainless steel boat grab handle set from AirowMarine. Designed for suitable marine and recreational vehicle installations, these polished stainless steel grab handles provide a convenient handhold for boat decks, swim platforms, cockpit areas and entry points.
Each set includes two marine grab handles and eight M6 flat-head mounting screws. The handles feature a mirror-polished finish and a round stainless steel tube design for a clean, coordinated look on yachts, pontoon boats, bass boats and other suitable vessels.
Before ordering, compare the handle dimensions, mounting hole spacing and screw requirements with your installation surface.
Key Features of These Marine Grab Handles
- 316 stainless steel construction: Made from AISI 316 stainless steel, a material commonly used for marine hardware because of its corrosion resistance.
- 12-inch grab handle size: A practical size for suitable boat deck, cabin and boarding-area installations. Confirm the overall dimensions against your available mounting space.
- Mirror-polished finish: A reflective stainless steel finish that complements other polished marine fittings.
- 25.4 mm round tube diameter: The listed tube diameter is approximately 1 inch.
- 260 mm mounting hole spacing: The listed center-to-center mounting hole distance is approximately 10.24 inches. Check the hole layout before installation.
- Two-handle set: Includes two stainless steel grab handles for use in suitable mounting locations.
- Mounting hardware included: Supplied with eight M6 flat-head screws, as specified for this set.
Product Specifications
| Product name | 12-Inch 316 Stainless Steel Boat Grab Handle Set |
|---|---|
| Product type | Marine grab handle / boat handrail |
| Quantity | 2 grab handles per set |
| Material | 316 stainless steel |
| Finish | Mirror polished |
| Nominal handle size | 12 inches |
| Tube diameter | Approximately 25.4 mm / 1 inch |
| Mounting hole spacing | Approximately 260 mm / 10.24 inches, center to center |
| Included fasteners | 8 M6 flat-head screws |
| Intended applications | Suitable boat decks, swim platforms, cockpit areas and entry points |
| Other possible applications | Suitable pontoon boats, yachts and RV entry areas, subject to fit and installation requirements |
Dimension note: Confirm whether the 12-inch designation refers to the overall handle length or another product measurement using the product dimension drawing. Check all mounting dimensions before drilling.
Applications for Boat and Marine Grab Handles
These 316 stainless steel marine grab handles can be considered for suitable installations on:
- Yachts: Handholds for appropriate deck, cabin or boarding areas.
- Pontoon boats: Grab handles for suitable access and movement areas.
- Bass boats and center-console boats: Additional handholds where the mounting surface and location are appropriate.
- Swim platforms: Handholds near boarding areas, where the installation design and mounting structure permit.
- RV interiors or entryways: An option for compatible recreational vehicle installations when the mounting surface and fasteners are suitable.
The correct placement and installation method depend on the vessel layout, mounting substrate and intended use.
Mounting and Installation Guide
Before installing these stainless steel boat grab handles:
- Measure the mounting area. Confirm that the available space accommodates the handle and its mounting bases.
- Check the hole spacing. The listed center-to-center mounting hole spacing is approximately 260 mm. Verify this measurement against the actual handle and mounting pattern.
- Check the mounting surface. Ensure that the substrate and any backing support are suitable for the intended load and installation location.
- Verify the fasteners. The set includes eight M6 flat-head screws. Confirm that their length, head style and material are appropriate for your mounting surface and installation conditions.
- Install and inspect. Follow an appropriate installation method for the vessel and mounting substrate. Check that the handles are securely attached and inspect the mounting points periodically.
A grab handle's safe load capacity depends on the handle design, fasteners, backing support, installation quality and mounting substrate. Do not treat this product as a certified fall-arrest point or assume a specific load rating unless the manufacturer provides supporting specifications.
Why Choose 316 Stainless Steel Marine Hardware?
AISI 316 stainless steel is commonly used for marine fittings because it offers good corrosion resistance in many marine environments. However, salt deposits, crevices, unsuitable cleaning products and contact with dissimilar metals can still affect its condition over time.
For routine care:
- Rinse the grab handles with fresh water after exposure to saltwater.
- Clean the polished surface with a suitable stainless steel cleaner.
- Inspect mounting screws and the surrounding surface periodically.
- Address corrosion, loose fasteners or damage before continued use.
Regular cleaning and inspection help maintain the finish and condition of your marine grab handles.
Package Contents
- 2 × 12-inch stainless steel grab handles
- 8 × M6 flat-head mounting screws
Please compare the listed package contents with your installation requirements before ordering.
Frequently Asked Questions
What material are these boat grab handles made from?
These marine grab handles are made from 316 stainless steel and have a mirror-polished finish.
How many grab handles are included?
Each set includes two grab handles and eight M6 flat-head mounting screws.
What is the mounting hole spacing?
The listed center-to-center mounting hole spacing is approximately 260 mm, or 10.24 inches. Verify the actual mounting pattern before drilling.
Is this a 12-inch boat grab handle?
The product is listed as a 12-inch grab handle set. Confirm the exact measurement reference and overall dimensions against the product drawing before ordering.
Can these stainless steel grab handles be used on a pontoon or yacht?
They may be suitable for pontoon boats, yachts and other vessels when the dimensions, mounting surface, fasteners and installation location are compatible.
Can I install these grab handles on an RV?
They may be suitable for an RV entryway or interior installation if the mounting surface, hole spacing and fasteners are appropriate. Check the installation requirements before use.
Are mounting screws included?
Yes. The listed package includes eight M6 flat-head mounting screws. Confirm that the supplied fasteners are suitable for your particular installation.
Are these grab handles suitable for saltwater environments?
316 stainless steel is commonly used in marine environments because of its corrosion resistance. Routine rinsing, cleaning and inspection are still recommended, particularly after saltwater exposure.
Ordering and Shipping
Please review the product dimensions, mounting hole spacing and package contents before ordering this 316 stainless steel boat grab handle set.
Shipping options and charges are calculated at checkout based on the destination, package and available shipping services.
For questions about fitment or installation, contact AirowMarine before ordering: sales@airowmarine.com